4/23/2007
ELITE SCREENS INFRARED REMOTE CONTROL CODE
1. Spectrum, VMAX2 (Plus), Home2(3) and Tension2(3) Series
The wave shape of sending :
And the difference between “0” and “1”
1
0
3a
a
a
3a
“a” is the wave period of 16 X 38K.
Up: 1111 0000 0001
Stop:1111 0000 0010
Down:1111 0000 0100
2. VMAX (Plus), SilverMax, CineTension Series
2.1: Type U ( VMAX Only)
Frequency:455Khz
UP
:010010000
STOP :010001000
DOWN : 010000100
2.2 Type G ( VMAX, SilverMAX and CineTension)
MCU Code(IR + RF control code protocol)
Remote
Head code+8 digital address code+8 digital operation code
Head Code = 48 counts (Count Clock=32767time/sec)
Digital "1"=24 counts (Counter clock = 32767tim/sec)
Digital "0"=12Counts (Counter clock = 32767tim/sec)
Low level voltage in between each digi. =24 (Counter clock=32767time/sec)
8 digits address code:
1~5digits mapping code to circuit board , high 3 digits and then 0
8 digits operation code
UP
:0xDD
STOP :0xCC
DOWN :0xEE
2.3 Type X ( VMAX Only)
(1) IR Controller is using IC # 2272 and 22262 to send and receive.
Frequency: 38KHZ
UP
:1000
STOP :0100
DOWN : 0010
3. Home Series
Up : 0xB1 0x4E 0x90 0x6F
Stop : 0xB1 0x4E 0x8A 0x75
Down : 0xB1 0x4E 0xCA 0x35
Elite Screens Inc.
|
Aiwa CT Z110 User Manual
Audiovox PROVE8 User Manual
Berkel CC34 User Manual
Blaupunkt PARIS RCM 104 User Manual
Denon DVD 3800BDCI User Manual
IRIS LLNR User Manual
JBL POWER SERIES Px600 2 User Manual
JVC GR AXM500 User Manual
JVC GR DV800 User Manual
JVC GR FXM37 User Manual