Cables to Go Switch 29570 User Manual

USER GUIDE  
WIRELESS USB HUB AND ADAPTER KIT/  
WIRELESS USB DEVICE ADAPTER KIT  
Model: 29570 (4-port Hub) /29571 (1-port Device Adapter)  
 
INTRODUCTION  
Thank you for purchasing the TruLink™ Wireless USB Hub and Adapter Kit. This product utilizes the  
latest in wireless technology, so you can connect USB enabled devices such as printers, external hard  
drives, and digital cameras up to 30 feet away. With a highly secure connection you can use this  
product in settings such as corporate offices, classrooms, or in your home office/entertainment system.  
We recommend that you read this manual thoroughly and retain for future reference.  
2
 
FEATURES  
Full support for printers, scanners, cameras, MP3 players, external hard drives, and other USB  
peripherals  
Access and device-sharing support for as many as three associated computers  
Certified by the USB-IF, guaranteeing connectivity with all Certified Wireless USB™ products  
Based on Ultra Wide Band technology, providing speedy data transfer and low power consumption  
Convenient plug-and-play connectivity, with simple software installation and setup  
3
 
SYSTEM REQUIREMENTS  
Microsoft® Windows® XP or Microsoft® Vista® 32-bit  
4
 
PACKAGE CONTENTS  
Wireless USB Host Adapter for your computer  
Wireless USB Hub for your USB devices  
Two (2) Dipole Antennas (for USB Adapter and USB Hub)  
3ft USB A Male/Mini-B Male Cable  
USB Extender with Cradle  
One (1) Power Adapter  
User Manual  
Quick Start Guide  
Driver CD  
5
 
DEVICE OVERVIEW  
WIRELESS USB HOST ADAPTER  
1. Link: Data Connection Indicator  
LED is solid when transfer device is connected  
LED blinks when data is being transferred  
2. PWR: Power  
LED is solid when powered by the PC  
1
2
6
 
DEVICE OVERVIEW  
WIRELESS USB HUB (4-PORT)-29570  
1. PWR: Power Indicator  
LED is solid when power is applied  
2. 1-2-3-4: USB Status Indicator  
Illuminated number/symbol indicates the USB port/s that is currently synced with a USB enabled  
device  
3. PWR plug  
Power adapter socket  
4. USB (mini-B) port  
In wireless mode, this connector is used for cable association  
2
5
In wired mode, this connector is used for wired operation  
5. USB A ports (4)  
Plug in USB enabled devices  
6. WIRELESS/WIRED switch  
3
Choose from wired or wireless mode by using this switch.  
1
6
4
7
 
DEVICE OVERVIEW  
WIRELESS USB DEVICE ADAPTER (1-PORT)-29571  
1. PWR: Power Indicator  
LED is solid when power is applied.  
2. PWR plug  
Power adapter socket  
3. USB A port  
Connect a USB enabled device  
4. USB (mini-B) connector  
In wireless mode, this connector is used for cable  
association  
In wired mode, this connector is used for wired  
operation  
5. WIRELESS/WIRED switch  
Choose from wired or wireless mode by using this  
switch.  
5
1
3
4
2
8
 
SOFTWARE/DEVICE INSTALLATION  
IMPORTANT NOTE:  
If installing on Windows XP, Service Pack 2 (SP2) is required. Verify that this has been  
installed before installing the Wireless USB Hub and Adapter Kit software.  
Before installing the software, make sure that the Wireless USB Host Adapter and  
Wireless USB Hub Adapter are not connected to the computer, and the Wireless USB Hub  
Adapter is not powered.  
Step 1-Installing the software  
Insert the CD provided and the one of the screens below will appear (depending on which kit you  
purchased). Select the “Software Installation” from the menu.  
9